The steps to create a green wall 2015

mur vegetal 300x277 Les étapes à suivre pour créer un mur végétal
install a green wall in his house


The steps to create a green wall 2015
The steps to create a green wall 2015
To create a living wall in his house, he must first make the right choice of plants and have available all necessary materials. Thereafter one should follow the steps to install the green wall.
  The location of the plant wall

  It is quite possible to put a green wall in any room of a house. Note, however, that exposure to the sun is not the same in these parts. Thus, it is advisable to take a sunny location.

  We must put in place an artificial lighting when the room is not exposed to the light of the sun. The place where the green wall is installed must be well-ventilated so that the plant does not rot.



To make him enjoy the sun, it is better to put it on the porch or canopy. It is also important to take into account the problems of condensation and overheating.
  The choice of plants

  One should choose those that can easily fit inside a house. Some plants can perfectly support the indoor environment of a home. When choosing plants, it is important to highlight its technical criteria so that it can thrive even with little sunlight.

  Most houseplants can be grown on a green wall. However, there are those who are more fragile than others and deserve special attention and care. It is therefore necessary to consider closely the water needs of plants and moisture and temperature they need.

  Plants need to be exposed to solar rays, alternatively, one can use an artificial light. Those who do not really need can be placed in the bathroom. It should also opt for plants that require little maintenance.
the device

  To install a plant wall, we need the following materials: a panel PVC or extruded polystyrene, two layers of horticultural felt the same size as the panels, a hose along more than 30 cm of the height of the panel, a rigid pipe of the width of the panel, a reservoir tank, a plastic hose for connecting the pipes.

  It also needs a controller, and a small pump of a fastening system of the panel. By installing it, you have to pierce the rigid tube with a needle every 1 cm, then place a layer of felt or horticultural felt on the panel.


tableau mur vegetal 300x225 Les étapes à suivre pour créer un mur végétal
Tabular form: the plants invite your walls 



The pipe and hole facing down and is installed at the top of the structure. The procedure thereafter to the second felt layer. With staples, draw a grid on the felt. The top tile is cut with a cutter in order to place the plant. The rigid to the flexible elbow, the other end thereof is blocked with an adhesive tape was attached pipe.

  The hose is then attached to the pump installed in the tank water collector. It is placed at the foot of the green wall. It is necessary to gather the plants that need the same care. Those who should be watered frequently are placed at the top while those who need lots of lights are placed near windows.
 

0 comments:

Post a Comment